Boss OD-1 Replica

This is a replica of the Boss OD-1 overdrive.  This replica does not include the FET switching circuit of the original, it uses a true (total) bypass switch with an LED indicator circuit.  The switching circuit has no effect on the sound of the stompbox.  Trademarks used here belong to their owners and no General Guitar Gadgets

• General Build Instructions
• OD-1 Instructions
• OD-1 Bill of Materials
• OD-1 Schematic
• OD-1 Parts Layout/Wiring Diagram
• ITS8 Ready-For-Transfer Printed Circuit Board Layout  – For use only if you are a complete DIY person who wants to etch and drill your own PCB.  Otherwise, we recommend you ignore this PCB mask and buy the Ready-to-Solder Printed Circuit Board or Complete Kit from the links below.
• Project Revisions History

Would you like a Ready to Solder Circuit Board for this project? Note: If you buy the kit, the Ready-to-Solder Printed Circuit Board (RTS PCB) is included in the kit.  You do not need to purchase this Ready to Solder Circuit Printed Board if you buy the kit.